Tianjin SWKS Technology & Development Co.,Ltd is one of the most reliable manufacturers and suppliers of custom pom robotic gripper contact pad in China. If you're going to buy bulk cheap custom pom robotic gripper contact pad, welcome to get quotation from our factory. Quality products and low price are available.
Start with the workpiece and the jaw. A contact pad for a machined blank may need a different face from a pad for a thin coated housing, even when the mounting holes are identical. The example shown uses two recessed mounting holes and a grooved contact face. A flat or contoured face can also be specified on the approved drawing.
What to check on the gripper jaw
Provide the workpiece material and weight, the available contact area, nominal jaw force, and the direction of acceleration during transfer. POM is a rigid contact material. Check for slip and contact marks with representative parts before selecting a face finish. Recess the mounting hardware below the workpiece contact plane where the assembly design permits.
| Drawing item | What to specify |
|---|---|
| Material | POM (acetal). Grade and color to be agreed for the application. |
| Manufacturing | Custom injection molding after drawing and tooling review. |
| Contact face | Flat, grooved or contoured to suit the workpiece. |
| Mounting interface | Hole spacing, recess depth and locating face per jaw drawing. |
| Inspection | Contact face profile, mounting hole positions and installed pad height. |
| Drawing inputs | 2D toleranced drawing or 3D model, plus the jaw and workpiece interfaces. |
Typical uses include robot end-of-arm tooling for component loading, fixture transfer, sorting and automated assembly. Review each contact point on the actual workpiece, especially when a thin wall, coating or cosmetic surface limits where clamping force can be applied.
Try the pad with a representative workpiece
For first-article review, check mounting hole pitch, recess depth and contact face flatness or profile. Install paired pads and check jaw alignment, workpiece seating and release. Run representative pick-and-place cycles and inspect for movement, marks and wear before approving the final design.
Browse related custom plastic parts.
We welcome your inquiry. Please send your drawing, target quantity and operating conditions to amanda@tjswks.com.
Hot Tags: custom pom robotic gripper contact pad, China, suppliers, manufacturers, factory, bulk, cheap, low price, quotation, Custom Plastic Abs Pp Pc Injection Molding Part, custom plastic parts high temperature, design injection molded plastic parts, injection plastic parts, lightweight plastic injection parts, PP Hard Injection Automotive Plastic
