Custom PA6 Two Hole Circular Puck

Material: ABS/POM/PA66/PP/PC/PA/PU/TPE/TPU etc.
Processing Service: Injection
Drawing Format: STP, STEP, IGS
Contact: amanda@tjswks.com / 0086-15222707659
Send Inquiry
Description

Tianjin SWKS Technology & Development Co.,Ltd is one of the most reliable manufacturers and suppliers of Custom PA6 Two Hole Circular Puck in China. If you're going to buy bulk cheap Custom PA6 Two Hole Circular Puck, welcome to get quotation from our factory. Quality products and low price are available.

 

Custom PA6 Two Hole Circular Puck

Material PA6 nylon; full grade by agreement
Service Custom injection molding, subject to geometry and tooling review
Drawing formats STP, STEP and IGS
Geometry According to the customer approved model and print
Dimensions and tolerance As specified on the released drawing
Color shown Natural ivory CAD visualization; production shade by sample approval

A Low Circular PA6 Component with Two Openings

This custom PA6 two hole puck has a complete circular perimeter, a low section and two plain openings through the body. One opening lies at the center and the other is offset along a radial direction. The supplied small puck model establishes the individual version shown here. Its upper surface has a shallow curved height distribution rather than a pronounced cylindrical hub. The shape is presented for made to drawing manufacture, with the customer defining the use and the fitted relationships of the completed component.

The catalog images use natural ivory PA6 to make the bare form easy to understand. They are photorealistic CAD based renderings, not photographs of an already molded sample. No metal sleeve, threaded fastener, raised collar or additional mounting feature is added to the presentation. The final production grade, shade and finish follow the agreement for the order. The customer model and released print govern the manufactured geometry, including small details that a product visualization may simplify.

The Center Hole and the Radial Offset

A centered opening can be related directly to the round outside boundary, but an offset opening needs an additional positional description. Their diameters alone do not fully specify the pattern. The separation between their centers and their relationship with the circumference belong to the identity of this puck. The designer can nominate which reference establishes those relationships and which dimensional requirements matter in the actual assembly. A generic instruction to provide two holes would omit the information needed to reproduce this particular version.

The offset opening gives an otherwise round outline a recognizable direction. If the equipment uses that direction, show the corresponding neighboring feature in an assembly view. The technical reference can identify orientation without adding a physical mark to the plastic part. If no specific installed direction is required, the offset hole still remains part of the nominal design. The CAD file does not reveal whether it receives a pin, a fastener or simply provides clearance, so those functions require information from the drawing owner.

Through Holes Rather than Blind Pockets

Both openings extend through the low disc. In an oblique photograph, the far exit can be hidden by the cylindrical wall, creating a darker region that resembles a pocket. An underside or overhead view helps explain the through geometry. The plain openings should not be interpreted as threaded holes or counterbores. If an additional feature is required, incorporate it into the customer design or an approved amendment rather than assuming it from the appearance of the hole edge in a rendering.

Where an opening meets a curved face, the visible rim is the intersection of two surfaces. Lighting may make one side of the rim appear wider or brighter than the other. That highlight does not establish a separate chamfer. The drawing can specify an edge condition when the installation needs one. If a lead or relief is proposed for manufacture, identify the affected location and its relationship with the intended hole fit. The accepted version should preserve a clear distinction between the nominal opening and any agreed local edge treatment.

Custom PA6 Two Hole Circular Puck modeled geometry closeup

Photorealistic rendering based on the supplied CAD geometry. Natural ivory PA6 shown for visualization; final dimensions, resin grade and color follow the approved drawing and sample.

Understanding the Shallow Face

The height variation across the face is subtle compared with the outside diameter. From above, the surface can look nearly flat because the change is expressed mainly through soft shading. A low side view makes the profile more apparent. This is why the puck should be reviewed through several views together. Its circular outline alone does not describe the complete surface arrangement. A sectioned technical view can show how the central region, circumference and opposite face relate to one another.

If the curved face participates in contact, identify the active area on the drawing. If it is only an exterior or clearance surface, define the relevant envelope instead. A flatness instruction and a requirement on a deliberately curved surface address different characteristics. The designer should state the intended form before a sample is judged. The image highlights are useful for communicating the general shape, but they are not a measurement of curvature, a surface roughness value or evidence of a tested contact pattern.

The Short Wall at the Circumference

The complete round edge distinguishes the puck from the open arc profiles in the same project. Its short cylindrical wall helps define the transition between the two broad faces. The outside diameter can be a functional boundary, an identification characteristic or both, depending on the customer's mechanism. The drawing owner can explain that role with a neighboring contour. A large round envelope does not automatically imply that every part of the circumference carries contact or requires the same fitted tolerance.

The reference chosen for inspection should follow the intended geometric relationship. A setup using the outside circumference answers a different question from one using the center opening. Neither is universally correct for every circular plastic component. The technical agreement can identify the face used for axial location, the feature used for radial location and the direction established by the offset opening. Recording those choices makes a sample report more useful than reporting isolated dimensions without explaining how the disc was positioned during measurement.

Support Conditions During a Shape Check

The way a low polymer disc is supported should be clear when its face or height profile is checked. An assessment of the free component is different from an assessment of a component held against a defined support. The customer can state which condition applies to each requirement. Extra force should not be used informally to make a sample resemble a nominal surface. A restrained check is meaningful when the procedure identifies the restraint and explains how it represents the intended arrangement.

A checking fixture can provide a repeatable reference if its contacts and relevant dimensions are documented. The report can identify the reading locations, equipment and preparation condition used. If a later sample is compared with the first article, preserve that setup information rather than relying on a single pass statement. This helps the buyer distinguish a geometry observation from a difference introduced by another support or measuring method. The bare product images intentionally omit a fixture so they do not imply an assembly condition that was never supplied.

PA6 Selection and Production Appearance

PA6 is the material requested for this puck. Before manufacture, confirm the full compound designation and whether the customer requires an unfilled, reinforced or otherwise modified grade. The application owner can supply the contact pair, environment and property targets when the formulation has not yet been selected. A resin description does not replace validation of the completed component in its intended equipment. No load capacity, friction value, temperature rating or regulatory certification is assigned solely from the generic polymer family or the rendered disc shape.

The natural ivory shade is illustrative. If matching matters, agree a color reference and the viewing conditions used for appearance acceptance. Texture, gloss and permissible process witnesses should also be identified where they affect the order. Nylon moisture condition can influence its dimensions and response, so the sample preparation state belongs in a relevant measurement agreement. A comparison between a newly molded sample and a differently stored sample should account for those conditions before attributing every difference to the nominal geometry or the tooling.

Custom PA6 Two Hole Circular Puck edge profile detail

Photorealistic rendering based on the supplied CAD geometry. Natural ivory PA6 shown for visualization; final dimensions, resin grade and color follow the approved drawing and sample.

Molding Review of the Disc and Hole Pattern

The tool design discussion can consider the broad faces, short outside wall and two opening positions together. Identify areas available for gates, ejection contact and cavity marking. A raised witness at a clearance region can have a different effect from a witness at an active seating surface. The buyer can show restricted zones directly on the print. If a proposed draft or local transition changes the interface, the drawing owner should review the concrete amendment before it becomes part of the manufacturing model.

The final sample should be associated with the revision actually used to produce it. If the designer accepts a change to a hole rim, face transition or outer edge, update the controlled package so the inspector does not measure against an obsolete view. The tooling proposal can explain its sampling scope and the agreed inspection characteristics. This keeps the discussion focused on the supplied low disc and its radial hole pattern, without turning a general capability statement about injection molding into an unsupported promise about every possible application.

A Representative Size with Controlled Variants

The supplied group includes small, medium and large pucks with a related two opening arrangement. This listing uses the small model as the representative design. Similar appearance does not establish that all dimensions follow one fixed scale ratio. Each production size needs its own accepted geometry and quantity. A buyer requesting another version should supply its actual file or controlled reference so the supplier can review the correct diameter, height distribution and opening relationship instead of estimating them from the representative photograph.

For a quotation, send the chosen model, the dimensioned print, PA6 grade requirements and the requested sample and production quantities. Include any mating geometry or acceptance fixture that controls the supply scope. Protect the broad faces and hole edges during packing, and identify the variant on the delivery label. A repeat order should retain the accepted revision even when the product name remains unchanged. With that reference established, SWKS can assess a new requirement against the correct two hole puck and identify any change that needs further review.

Request a Drawing Review and Quotation

See our plastic injection parts and engineering plastics selection guide. Send your drawing, PA6 requirements and quantity to amanda@tjswks.com or call 0086-15222707659.

Hot Tags: Custom PA6 Two Hole Circular Puck, China, suppliers, manufacturers, factory, bulk, cheap, low price, quotation, ABS Enclosure Plastic Injection Molding Part Nylon Parts, custom plastic injection parts, Custom Plastic Part Injection Molding Product, injection molded plastic parts, Plastic Product Nylon Abs PP Molded Parts, precision plastic injection parts

Send Inquiry

Send Inquiry