Tianjin SWKS Technology & Development Co.,Ltd is one of the most reliable manufacturers and suppliers of custom pa66 industrial air compressor cooling fan impeller in China. If you're going to buy bulk cheap custom pa66 industrial air compressor cooling fan impeller, welcome to get quotation from our factory. Quality products and low price are available.
Custom PA66 Industrial Air Compressor Cooling Fan Impeller
This custom PA66 compressor cooling fan impeller is supplied to the approved drawing. Send the design and operating information for the air compressor cooling assembly to review the part and tooling scope.
| Part material | PA66 |
|---|---|
| Other custom materials | ABS / POM / PA66 / PP / PC / PA / PU / TPE / TPU |
| Processing | Injection molding |
| Drawing formats | STP / STEP / IGS |
Cooling impeller as part of a compressor assembly
An air compressor cooling fan impeller moves cooling air within a specified equipment arrangement. Blade geometry, the hub and housing clearances are governed by the compressor design. The illustrated nylon impeller shows a central hub with curved blades. Its final blade arrangement, material grade and mounting features must follow the released product drawing. A quotation starts with the compressor model or equivalent data about the mounting area and the fan's intended function in the air path.
Show the portion of the assembly where air enters and leaves the fan, including any shroud, nearby fins and protective cover. An impeller drawing provides the shape of the loose part but may not show restrictions around it. If the equipment uses more than one housing, provide the applicable version for each fan. The machine designer should define airflow and operating requirements and confirm them with the complete equipment during qualification.

Illustrative rendering. Final geometry follows the approved drawing.
Direction of rotation and blade orientation
Specify the intended direction of rotation and the side from which it is viewed. A photo of the front can be misleading when turned around, particularly where curved blades are involved. Put rotation direction on the drawing relative to an identified face of the hub or compressor. If the part comes in left and right versions, give each a distinct part number, orientation reference and sample quantity. Record the matching housing and motor or shaft assembly for each version.
An impeller near an enclosure wall needs clearance at the blade tips and at the faces nearest the housing. Provide the clearance envelopes the equipment owner expects to maintain and show what controls the installed position. When the hub is clamped against a shoulder, the installed face-to-tip dimensions should be reviewed from the shoulder and not from a loose reference surface. Draw a section that includes surrounding stationary parts present in the final compressor assembly.
Hub fit and retention hardware
Provide the shaft and hub drawings, including a key, flat, sleeve or retaining feature where applicable. Identify which surface controls alignment and which element keeps the fan in its installed position. If the molded impeller receives a metallic insert, the insert geometry and mounting orientation belong in the quote package. Describe how the hub seats and show the installation direction, especially if a flange or stepped bore is not symmetric.
A diameter measurement on the plastic hub does not describe the entire fit. Define which section of the bore contacts the mating part and what should be checked relative to the rotation axis. An assembly with a shoulder and a fastener may require a separate check for its axial location. If a customer supplies a shaft sample, identify the approved drawing revision and whether the sample has been used. A worn or coated shaft can differ from the original acceptance geometry.
Selecting the nylon grade
PA66 molding grades differ in reinforcement, moisture response and performance across temperatures. Include the grade and approved supplier if specified. Where the fan is near a warm compressor or exposed to oil mist, provide the relevant operating and exposure conditions from the equipment documentation. A change to a reinforced formulation can alter shrinkage and the shape of the molded hub or blades. Evaluation should use the chosen grade with the actual part and assembly design.
A conditioned nylon part can measure differently from a newly molded one. State the measurement condition for hub and blade dimensions, including any conditioning procedure required by the customer. If dimensional evidence comes from more than one team, agree on how samples will be stored and identified before inspection. For a replacement program, document the original material approval and which variants need a separate check if a grade is changed.

Illustrative rendering. Final geometry follows the approved drawing.
Tooling review for a hub with blades
The thick central section and thinner curved blades need to be reviewed together during tool design. Consider how material reaches the tips, how the part releases from the mold and whether a marking or witness could interfere with a mounting surface. If the hub bore uses an insert or a follow-up operation, clarify the intended finished datum. A section through a blade root can show where the wall changes and where local tooling access may limit an intended feature.
Discuss the cooling approach and how dimensional changes at the hub can be distinguished from those at the blades. In a multi-cavity plan, identify how sampled parts can be traced to their cavity. Mark the regions where visual observation matters and the dimensions that will be verified with a fixture or by an agreed measurement method. A first-article report can then identify the tool configuration and the part condition used for each result.
Assembly qualification remains with the equipment design
A sample fit check should include the installed shaft and surrounding shroud. The equipment team can verify movement, assembly clearance, vibration, noise and thermal performance under its defined approval conditions. Provide any required balance, rotational or endurance acceptance criteria from that team before the order is quoted. The molded component drawing should define the geometry and material that support those checks. The illustrated part does not establish a speed or temperature rating for any particular compressor.
If the test program includes more than one equipment variant, identify the combination of shaft, housing and fan tested in each case. Record the installed fan orientation and whether the surrounding components are representative of production. When a first article is evaluated, retain its cavity or lot identity and the relevant checks for hub location and blade profile. Later comparisons are more useful when they refer to the same equipment and inspection setup.
Pack the blades for a repeatable receiving check
A fan can travel with its hub supported while the vane tips remain clear of packing loads. State any receiving inspection or protection requirements and identify the surfaces the buyer considers critical. If several variants have similar envelopes, provide the desired identification on the component or package. Use a marked assembly drawing so orientation and model can be confirmed before installing a sample.
A replacement inquiry should include the compressor model, approved fan drawing, mating shaft reference and expected quantities. For a worn or damaged impeller, include photos showing which areas were affected and the context in which the issue appeared. Identify the original model number and revision if available. If the drawing is being recreated, provide a representative unworn part and explain which performance checks are performed at equipment level.
Prepare the tooling and sample scope
An initial review can distinguish the molded body from any purchased hub insert, retention hardware or secondary operation. State whether the quote covers only the part or an additional assembly step and identify which hardware the customer will supply. Provide the anticipated volumes and whether the compressor uses different cooling layouts that need separate variants. For first articles, include the approved drawings, sample quantity and the delivery date by which the equipment team can perform its validation.
A supplier can use assembly sections to see how the shaft, impeller and shroud fit together. Mark any features fixed by existing compressor tooling and identify other regions that are open to manufacturing review. If a proposed change affects blade geometry or clearances, send it for evaluation by the equipment owner before the drawing is released. Carry the approved revision forward to production inspection and to future replacement orders.
Review installed position from the hub
An impeller with the correct blade shape can still sit too close to a surrounding wall if a hub shoulder, spacer or retaining washer differs from the intended hardware. Check the direction and installed stack in the first article. Provide a side view that shows the full assembly and identifies the stationary faces adjacent to the fan. A customer may use different motor arrangements under the same compressor family, and the revised shaft position should be included in the equipment drawing.
Document which geometry is checked during molding approval and which requires the rotating assembly. The first category can include bore size, drawing dimensions and relative position of the blades. Equipment checks should be specified and performed by the team responsible for the final configuration. Keep the molded part identifier and trial assembly record together. If a design change is introduced after trial, document which shaft and housing were used for the original result and check whether the change affects the approval scope.
Parts and documentation for a service sample
Where a compressor is no longer made in its original version, provide the assembly documentation used to select the replacement. Confirm that any shaft, hub adapter or guard shown in the model corresponds to the machine in service. A sample review can then distinguish a change needed to accommodate the new equipment from a dimensional adjustment to the molded part itself.
Explore our custom plastic injection parts or read the SWKS guide to optimizing molded parts for automation equipment.
Request a quotation
Send the approved drawings, application details and estimated order quantities to amanda@tjswks.com or call 0086-15222707659.
Hot Tags: custom pa66 industrial air compressor cooling fan impeller, China, suppliers, manufacturers, factory, bulk, cheap, low price, quotation, Custom ABS PC PP Plastic Mould Machine, Custom Cast Urethane Polyurethane Parts, Nylon ABS Plastic Injection Molded, perforated plastic sheet, Plastic Product Nylon Abs PP Molded Parts, TPE plastic product






