Tianjin SWKS Technology & Development Co.,Ltd is one of the most reliable manufacturers and suppliers of custom pa66 industrial robot gripper jaw pivot bushing in China. If you're going to buy bulk cheap custom pa66 industrial robot gripper jaw pivot bushing, welcome to get quotation from our factory. Quality products and low price are available.
PA66 Flanged Bushing for a Gripper Jaw Pivot
This custom injection molded PA66 bushing fits between the pivot pin and the jaw of an industrial robot gripper. The sleeve provides the radial interface, and the flange gives the jaw an axial seating face when the assembly is designed for it. The bore and flange dimensions are made to the approved mating-part drawing.
Pin Fit, Jaw Clearance and Flange Seat
Define the bore clearance at the operating condition and the installation fit at the jaw housing. Review the pin diameter, surface finish, bore length and mating chamfers together. Flange thickness affects the axial stack-up and available jaw movement. See our guide to injection molding tolerances and part performance for related drawing considerations.
PA66 Grade and Conditioning
PA66 moisture uptake can change dimensions and mechanical properties. Specify whether dimensions are checked dry as molded or after agreed conditioning, and identify the humidity and temperature expected in service. Review the exact grade against pivot load, cycle frequency, pin finish and lubrication before setting wear or service-life targets.
Robotics and Automation Applications
The flanged sleeve format can be adapted for two-finger industrial grippers, pick-and-place jaws and small pivoting mechanisms in automation fixtures. For fit validation, share the housing and pin drawings with the bushing drawing and identify the surfaces that control end play and jaw alignment.
Drawing and Quotation Information
| Item | Specification |
|---|---|
| Material | PA66, grade and conditioning to be agreed |
| Process | Custom injection molding |
| Sleeve geometry | Bore, outside diameter, sleeve length and flange per drawing |
| Mating parts | Pin and jaw housing dimensions, axial stack-up and installation fit |
| Inspection | Bore and flange dimensions, seating and pivot clearance where specified |
Product images illustrate a representative design. Final geometry, dimensions and performance requirements are confirmed against the approved drawing.
Send your STP, STEP or IGS file, quantity and critical fit requirements to amanda@tjswks.com or contact us at 0086-15222707659.
Hot Tags: custom pa66 industrial robot gripper jaw pivot bushing, China, suppliers, manufacturers, factory, bulk, cheap, low price, quotation, ABS Injection Moulding Plastic Parts, consumer plastic injection parts, Injection Molded Plastic Parts Manufacturers, polypropylene injection molding, PP Injection Components, TPE plastic product
