Tianjin SWKS Technology & Development Co.,Ltd is one of the most reliable manufacturers and suppliers of custom pom industrial printing machine doctor blade holder in China. If you're going to buy bulk cheap custom pom industrial printing machine doctor blade holder, welcome to get quotation from our factory. Quality products and low price are available.
Custom POM Industrial Printing Machine Doctor Blade Holder
The molded holder locates a separately specified doctor blade on the press assembly. The illustration shows an elongated holder with a blade seat and fixing pattern. The approved station drawing defines the working edge, clamp arrangement and materials selected for the process. Pictures are generated examples for project discussion. All finished dimensions, material specification and qualification requirements depend on the approved design.
Identify the blade seat on the printing station
A doctor blade holder maintains the blade's position relative to the station assembly. The POM holder shown here is a molded locating component. It has a long seat or groove, a mounting face and a hole pattern. The blade, clamp and holder must be identified separately on the quote. A drawing of the holder alone does not define the pressure or angle used by the press. Provide the printing station drawing and identify the working extent of the blade to clarify what the molded part needs to support.
Product specification
| Material | POM |
| Manufacturing method | Custom injection molding |
| Application | industrial printing stations with drawing-defined doctor blade mounts |
| Assembly references | metal doctor blade, clamp strip, fasteners and printed-cylinder station |
| Drawing formats | STP, STEP, IGS and a dimensioned print |
| Validation scope | full-width straightness after installation, blade backing fit and repeatable seating in the specified press |
At sample approval, identify the blade back and the locating channel used by the press designer. The part manufacturer and the purchaser can then review the same configuration. Retain the reference setup, including the way the component is supported and the selected mating items. A difference between an unmounted measurement and an assembled one should be documented with the condition and measuring point. This avoids deciding whether a sample is usable based only on the shape visible in a photograph of doctor blade locating holder.
Draw the backing surface and clamp stack
Include the blade backing section, how it enters the seat and the surfaces that locate it in the station. A clamp strip may press on the blade or the holder depending on the design. Show the screw types, their heads and the full installed clamp stack in a section. A depth measurement at one end of the molded seat can miss a local step or bow along the center. An approved reference and a drawing of the critical straight section make it easier to compare molded samples with actual assembly expectations.

Use a controlled sample to dimension the mounting pads from a shared press reference. Before agreeing on a manufacturing tolerance, identify which areas can use ordinary process variation and which need a specifically documented result. The priority should be the features related to installation, the agreed service role and the checks in the equipment drawing. Label the revision of the molding and mating components if any decision is made during a pilot run for industrial printing stations with drawing-defined doctor blade mounts.
Inspect the long dimension in its installed state
Record the usable width of the press and the span at which the holder is secured. Review straightness when free and after the holder is installed on the defined mounting reference. A long plastic member can lie differently when fastened without revealing a change in its loose width. Use a section through the actual station so the important relationship between the holder seat and the rest of the setup is clear. The press designer defines blade force, angle and contact response for the finished configuration.
On the quotation review, specify the actual ink and wash fluid and their contact time. Add an acceptance method to the drawing when the requirement cannot be understood from the model alone. Explain whether the initial check requires a fixture, a reference assembly or a representative installed component. If an inspection report is requested, agree on the fields that must appear in the report before ordering pilot parts. This helps keep the assessment of doctor blade locating holder separate from qualification of the complete equipment.
Specify the ink and cleaning cycle
Supply the ink family and wash fluid used at the station and define what exposure reaches the plastic. Identify whether the holder is wiped between short runs or removed and left in contact with cleaner during maintenance. Record the surface condition that matters for fitting the blade backing. Compare material and surface condition using the approved grade and process, because a generic designation such as POM does not establish suitability for every ink, detergent or solvent. Select the cleaning method with the equipment owner and release it separately from the tooling drawing.

During a review of doctor blade locating holder, ask the owner to record which length of the holder must be straight after installation. Treat this as a controlled interface rather than an appearance preference. A model supplied alone may have enough information for a rough quotation while omitting the references needed to confirm assembly. For an engineering review of industrial printing stations with drawing-defined doctor blade mounts, mark the relevant surfaces on both the customer assembly and the part drawing. Indicate which dimensions are checked before assembly and which depend on the selected mating items.
Plan blade changes on a representative press
The mating components can prevent access to a holder feature during a color change even though the bare holder looks accessible. Include the path needed to extract the blade sideways or remove the clamp from the station. Record whether a mechanic can reach the screws in the intended order. Try the customer-approved sequence on a reference assembly to confirm fit and access. Inspect the chosen sample after repeated authorized assembly trials if that is part of the release plan. Keep fit approval separate from print quality testing, which belongs to the press process.
Ask the design team to document the blade access direction and hardware used during a color change. A useful review separates the manufactured component from the extra space needed to install it. Record the position and any access requirement after nearby hardware is fitted. When different equipment revisions share an outer shape, include a separate view of each arrangement. This gives purchasing a clear way to trace a request for doctor blade locating holder to the assembly that actually needs it.
Keep the spare holder identity tied to the press width
If a press family uses several widths or blade backing formats, submit the part number and cross section for each. Include expected sample and recurring quantities for each part. A change in blade provider can change the seat requirements even if the nominal working width stays the same. Send the holder drawing, blade and station references to review molding feasibility and obtain a quote.
For this item the drawing package should give the complete context. Specifically, agree on how seat condition, bore locations and appearance are compared to an approved sample. The best section is one that shows the feature in its intended assembled state. Include hardware type and any permitted alternate part. If access or fit changes with the alternate, quote an agreed revision first and review the second configuration before sharing a tooling decision. Keep the part data for industrial printing stations with drawing-defined doctor blade mounts tied to its intended revision.
Purchase and sample approval
In a new sourcing project, identify which requirements are frozen and which are still in development. Specify timing for samples separately from a request for routine batches. If the molding is meant for several options, provide a clear configuration matrix instead of mixing dimensions from several versions in one drawing. Confirm how the customer will approve any updates before an order for production is released.
When preparing the purchase request, attach the model, section views, finish specification and the expected annual requirements. If an approved physical part exists, identify the changes that should be carried into the new tooling. A worn item is useful for explaining access and orientation while the controlled drawing should define the intended usable geometry. Keep the source item and agreed reference assembly identified separately.
Incoming inspection in the project record
During a review of doctor blade locating holder, ask the owner to agree on how seat condition, bore locations and appearance are compared to an approved sample. Treat this as a controlled interface rather than an appearance preference. A model supplied alone may have enough information for a rough quotation while omitting the references needed to confirm assembly. For an engineering review of industrial printing stations with drawing-defined doctor blade mounts, mark the relevant surfaces on both the customer assembly and the part drawing. Indicate which dimensions are checked before assembly and which depend on the selected mating items.
Blade seat in the project record
Ask the design team to identify the blade back and the locating channel used by the press designer. A useful review separates the manufactured component from the extra space needed to install it. Record the position and any access requirement after nearby hardware is fitted. When different equipment revisions share an outer shape, include a separate view of each arrangement. This gives purchasing a clear way to trace a request for doctor blade locating holder to the assembly that actually needs it.
Related SWKS products include Custom POM Industrial Printing Machine Ink Roller Bearing Sleeve and Custom PA66 Industrial Printing Machine Paper Feed Roller Gear.
For a drawing-based quotation, send the assembly references and required quantity to amanda@tjswks.com.
Hot Tags: custom pom industrial printing machine doctor blade holder, China, suppliers, manufacturers, factory, bulk, cheap, low price, quotation, Injection Molding Parts ABS Plastic Special-shaped Parts, packaging plastic injection parts, PC ABS Plastic Injection Molding Product, PE machine parts, Plastic Molding Parts Manufacturers, POM Plastic Machine Parts






